GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Safari - 2WD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Headlamp Replacement

Removal Procedure

    Object Number: 296122 Size: SH
  1. Turn off the headlamp switch.
  2. Open the hood.
  3. Remove the screw that retains the corner capsule to the composite headlamp.

    4. Object Number: 296118 Size: SH
  4. Remove the three bolts that retain the composite headlamp.
  5. Remove the headlamp.
  6. Disconnect the headlamp electrical connectors.
  7. Remove the headlamp bulbs.

Installation Procedure

    Object Number: 296118 Size: SH
  1. Install the headlamp bulbs.
  2. Connect the headlamp electrical connectors.
  3. Install the headlamp assembly.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the bolts in order to retain the composite headlamp.

    5. Tighten
    Tighten the composite headlamp bolts to 12.5 N·m (110 lb in).


    Object Number: 296122 Size: SH
  5. Install the corner capsule.
  6. Install the corner capsule screw.

    7. Tighten
    Tighten the corner capsule screw to 5 N·m (44 lb in).

  7. Close the hood.