For 1990-2009 cars only
Tools Required
| • | J 23327-1 Forward Clutch Spring Compressor (Bridge) |
| • | J 34627 Snap Ring Remover and Installer |
| • | J-42628 Plate |
- Install the J 23327-1 and the J-42628 .
- Tighten the J 23327-1 .
- Remove the low and reverse clutch retainer ring (693) using the J 34627 .
- Remove the low and reverse clutch spring assembly (694).
- Blow compressed air into the case passage to remove the low and reverse clutch piston (695).
| • | (1) LO Feed Passage |
| • | (2) REV Feed Passage |
