Step | Action | Value(s) | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Instrument Cluster System Check? | -- | Go to Step 2 | |||||||
2 | Use a scan tool in order to read the vehicle control module (VCM) diagnostic trouble codes. Are there any vehicle speed sensor related trouble codes? | -- | Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls | Go to Step 3 | ||||||
3 |
Is there continuity? | -- | Go to Step 5 | Go to Step 4 | ||||||
4 | Connect a DMM J 39200 between the instrument cluster connector cavity B14 and the VCM connector C4 cavity 4. Is there continuity? | -- | Go to Step 6 | Go to Step 7 | ||||||
5 | Repair the short to ground in CKT 389 (DK GRN) between the following components:
Is the repair complete? | -- | -- | |||||||
6 | Replace the instrument cluster . Refer to Instrument Cluster Replacement . Is the repair complete? | -- | -- | |||||||
7 | Repair the open in CKT 389 (DK GRN) between the instrument cluster and the VCM. Is the repair complete? | -- | -- |
