GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 Safari - 2WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Hood Release Lever Replacement

Removal Procedure
  1. Remove the left cowl side trim panel. Refer to Cowl Side Trim Panel Replacement .

  2. Object Number: 321603 Size: SH
  3. Remove the screws that retain the hood release lever to the cowl side panel.

    4. Object Number: 321605 Size: SH
  4. Remove the cable from the handle.

Installation Procedure

    Object Number: 321605 Size: SH
  1. Install the cable to the handle.

    2. Object Number: 321603 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws that retain the hood release lever to the cowl side panel.

    3. Tighten
    Tighten the hood release lever screws to 8 N·m (71 lb in).

  3. Install the left cowl side panel trim. Refer to Cowl Side Trim Panel Replacement .