Tools Required

J 38778 Door Trim Pad Clip Remover

1. Remove the screws that retain the front trim molding to the door.
2. Remove the trim molding from the door.
3. Use the J 38778 in order to remove the rear trim moldings.
4. Remove the retainers from the rear trim molding.

1. Install the retainers to the rear trim molding.
2. Install the rear trim molding to the door.
3. Install the front trim molding to the door.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

4. Install the screws that retain the front trim molding to the door.

Tighten
Tighten the screws to 1.9 N·m (17 lb in).