GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 GMC Suburban - 2WD 🢒 Restraints 🢒 SIR 🢒 Split Bench Seat Replacement

Removal Procedure

    Object Number: 276306 Size: SH
  1. Remove the seat trim cover. Refer to Power Seat Riser Trim Cover Replacement .
  2. Remove the seat retaining bolts.
  3. Remove the seat and the seat belt from the vehicle.

Installation Procedure

    Object Number: 276306 Size: SH
  1. Install the seat to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the seat retaining bolts.

    3. Tighten
    Tighten the bolts to 55 N·m (41 lb ft).

  3. Install the bolts retaining the seat belt to the floor.

    4. Tighten
    Tighten the bolts to 55 N·m (41 lb ft).

  4. Install the seat trim cover to the seat. Refer to Power Seat Riser Trim Cover Replacement .