GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 GMC Suburban - 2WD 🢒 Steering 🢒 Steering Wheel and Column - Standard 🢒 Shift Lever Replacement - On Vehicle

Removal Procedure

    Object Number: 362445 Size: SH
  1. Roll back the seal until the TORX® head screw is exposed.
  2. Remove the TORX® head screw (2).
  3. Remove the shift lever (1).

Installation Procedure

    Object Number: 362445 Size: SH
  1. Install the shift lever (1).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the TORX® head screw (2).

    3. Tighten
    Tighten the screw to 22 N·m (16 lb ft).

  3. Roll the seal over the TORX® head screw.