Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle Column Shift

1. Remove the upper tilt head components. Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle .



2. Slide the 2 connectors of the turn signal and multifunction switch assembly (2) off from the bulk head connector (1).



3. Remove the key alarm connector (1) from the lock module assembly (2).
4. Remove the 2 tapping screws from the ignition key alarm switch assembly (3).

Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle Floor Shift

1. Remove the upper tilt head components. Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle .



2. Slide the 2 connectors of the turn signal and multifunction switch assembly (2) off from the bulk head connector (1).



3. Remove the key alarm connector (1) from the lock module assembly (2).
4. Remove the 2 tapping screws from the ignition key alarm switch assembly (3).