Notice: Broken or deteriorated mounts can cause misalignment and destruction of certain drive train components. When a single mount breaks, the remaining mounts are subjected to abnormally high stresses.

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the transmission mount to crossmember nuts.
3. Remove the transmission mount bolts to the transmission.
4. Raise the transmission using a suitable transmission jack, just enough in order to permit the removal of the mount.
5. Remove the transmission mount.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the rear transmission mount.
2. Install the transmission mount bolts.

Tighten
Tighten the transmission mount bolts to 50 N·m (37 lb ft).

3. Lower the transmission.
4. Install the transmission mount to crossmember nuts.

Tighten
Tighten the transmission mount to crossmember nuts to 54 N·m (40 lb ft).

5. Lower the vehicle.