GM Service Manual Online
For 1990-2009 cars only

Radio Rear Side Door Speaker Replacement Crew Cab

Removal Procedure


    Object Number: 799001  Size: SH
  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.
  2. Remove the screws (1) retaining the speaker to the mounting bracket.
  3. Disconnect the electrical connector from the speaker.
  4. Remove the speaker from the mounting bracket.
  5. Remove the bolts (2) retaining the speaker mounting bracket to the door, if required.
  6. Remove the speaker mounting bracket.

Installation Procedure


    Object Number: 799001  Size: SH
  1. Install the speaker mounting bracket.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the bolts (2) retaining the speaker mounting bracket to the door, if removed.
  4. Tighten
    Tighten the bolts to 6 N·m (53 lb in).

  5. Install the speaker to the mounting bracket.
  6. Connect the electrical connector to the speaker.
  7. Install the screws (1) that retain the speaker to the mounting bracket.
  8. Tighten
    Tighten the screws to 2 N·m (53 lb in).

  9. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement in Doors.
  10. Verify the component operation.

Radio Rear Side Door Speaker Replacement Extended Cab

Removal Procedure

  1. Remove the door trim panel. Refer to Rear Side Access Door Trim Panel Replacement in Doors.

  2. Object Number: 379213  Size: SH
  3. Remove the speaker by pushing down on the retainer.
  4. Disconnect the electrical connector.

Installation Procedure


    Object Number: 379213  Size: SH
  1. Install the electrical connector.
  2. Install the speaker by snapping the speaker into place.
  3. Install the door trim panel. Refer to Rear Side Access Door Trim Panel Replacement in Doors.
  4. Verify the component's operation.