GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 348707  Size: SH
  1. Gently push the assembly toward the front edge of the door.
  2. Lift the rear of the assembly from the door by using a small flat tool.
  3. Remove the courtesy lamp/reflector from the door panel.
  4. Twist and remove the socket container from the housing.
  5. Remove the bulb from the socket (if replacement is required).

Installation Procedure


    Object Number: 348707  Size: SH
  1. Install the bulb into the socket.
  2. Install the lens to the vehicle.
  3. Install the bulb and socket assembly into the housing into the lens (if equipped).
  4. Insert the tab on the assembly into the slot in the door panel at the front edge.
  5. Pivot the assembly into the door panel.
  6. Press the lens at the rear until the lens snaps into place.