Tool Stowage Compartment Bracket Replacement PRO

1. Remove the tool storage compartment. Refer to Tool Storage Compartment Replacement .
2. Remove the rear seat hinge filler panel cover and plastic push pins, in order to gain access to seat riser retaining nuts.
3. Remove the nuts that retain the tool storage compartment brackets (1, 2) to the seat riser studs.
4. Remove the brackets from the vehicle.

1. Install the brackets to the vehicle and hand tighten the nuts.
2. Install the tool storage compartment. Refer to Tool Storage Compartment Replacement .

Notice: Refer to Fastener Notice in the Preface section.

3. Tighten the nuts that retain the tool storage compartment brackets (1, 2) to the seat riser studs.

Tighten
Tighten the nuts to 50 N·m (36 lb ft).

4. Install the rear seat hinge filler panel cover and plastic push pins.