Important: Always use a new gasket and seal for the transfer case and the transfer case adapter. Do not use any type of sealant or adhesive in place of or with the gasket or the seal.

Important: The transfer case adapter must be installed so that the adapter is evenly seated to the transmission before installing the retaining nuts.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Tighten
Tighten the bolts to 50 N·m (37 lb ft).

Important: When installing the gasket to the transfer case, make sure that the yellow printing on the gasket is facing toward the transfer case (away from the transmission). The locating tab on the gasket should always be pointing up.