GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1606539  Size: SH
  1. Loosen the screw holding the air cleaner housing door in place.
  2. Remove the air cleaner housing door.
  3. Remove the air filter element.

Installation Procedure


    Object Number: 1606539  Size: SH
  1. Stand facing the front fender on the passenger side of the vehicle. Insert the element into the housing. Place the palm of your hand on the inboard end of the element, and press the element into position.
  2. Press both downward and inboard until the outboard end of the element clicks into place inboard of the locating tab.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the air cleaner housing door and tighten the screw.
  5. Tighten
    Tighten the screw to 4 N·m (35 lb in).