Instrument Cluster Components P42
Name | Location | Locator View | Connector End View |
|---|---|---|---|
Engine Coolant Level Switch (Diesel) | On the LH side of the radiator surge tank mounted above the radiator | ||
Engine Coolant Temperature Gauge Sensor (Diesel) | At the front of the LH cylinder head | -- | |
Engine Coolant Temperature Gauge Sensor (Gasoline) | On the side of the LH cylinder head between the spark plugs | ||
Engine Oil Pressure Gauge Sensor | At the top rear of the engine block | ||
Fuel Level Sensor (Diesel) | At the top center of the fuel tank | ||
Generator | At the RH front of the engine | Engine Electrical Component Views in Engine Electrical | Engine Electrical Connector End Views in Engine Electrical |
Ignition Coil | Mounted on a bracket above the top edge of the RH cylinder head | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Ignition Switch | On the lower RH side of the steering column below the support bracket | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Cluster | Body builder installed | -- | |
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (Gasoline) | At the LH side of the radiator support | Engine Controls Component Views in Engine Controls | VCM Connector End Views in Engine Controls |
Vehicle Speed Sensor Calibrator (Diesel) | At the LH side of the drivers island under the relay bracket | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
C102 | Engine harness to the generator harness at the RH front of the engine below the generator | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 | Engine harness to the IP harness, in the bulkhead near P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C202 | Engine harness to the IP harness, in the bulkhead near P100 | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C213 | Door ajar switch signal provision for the body builder | -- | -- |
C300 | Engine harness to the rear chassis harness, near the middle of the chassis at the outside of the LH frame rail | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C401 | Rear chassis harness to the fuel pump module harness, near the LH frame rail in back of the fuel tank | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G108 (Diesel with Manual Trans) | On top of the thermostat housing | Power and Grounding Component Views in Wiring Systems | -- |
G108 (All Gasoline, Diesel with Auto Trans) | At the rear of the LH cylinder head | Power and Grounding Component Views in Wiring Systems | -- |
G200 | LH interior bulkhead near the relay bracket | -- | -- |
G400 | At the LH frame rail in front of the fuel tank | Power and Grounding Component Views in Wiring Systems | -- |
P100 | LH bulkhead left of the steering column | Harness Routing Views in Wiring Systems | -- |
S110 (Gasoline) | In the engine harness, approximately 4 cm (2 in) from the breakout for C200 towards P100 | -- | -- |
S110 (Diesel) | In the engine harness, approximately 4 cm (2 in) from the ABS harness connectors C110 and C111 towards P100 | -- | -- |
S143 (MFI Diesel) | In the engine harness, approximately 17 cm (7 in) from P100 | -- | -- |
S143 (EFI Diesel) | In the engine harness, approximately 16 cm (6 in) from the A/C compressor clutch breakout towards C200 | -- | -- |
S143 (Gasoline) | In the engine harness, approximately 6 cm (2 in) from C200 breakout towards the MAF sensor | -- | -- |
S169 (Diesel) | In the engine harness, approximately 11 cm (4 in) from the breakout for the A/C compressor clutch | -- | -- |
S205 | In the IP harness, approximately 4 cm (2 in) before the fuse block breakout toward C200 | -- | -- |
S207 | In the IP harness, approximately 66 cm (26 in) before the fuse block breakout toward the instrument cluster connector | -- | -- |
S218 | In the IP harness, approximately 28 cm (11 in) before the fuse block breakout toward C200 | -- | -- |
S406 | In the chassis harness, approximately 10 cm (4 in) from G400 | -- | -- |
Instrument Cluster Components P32
Name | Location | Locator View | Connector End View |
|---|---|---|---|
Engine Coolant Level Switch | On the RH side of the radiator surge tank mounted above the radiator | ||
Engine Coolant Temperature Gauge Sensor (Diesel) | At the front of the LH cylinder head | ||
Engine Coolant Temperature Gauge Sensor (Gas) | On the side of the LH cylinder head between the spark plugs | ||
Engine Oil Pressure Gauge Sensor | At the top rear of the engine block | ||
Fuel Level Sensor (Diesel) | At the top center of the fuel tank | -- | |
Generator | At the RH front of the engine | Engine Electrical Component Views in Engine Electrical | Engine Electrical Connector End Views in Engine Electrical |
Ignition Coil (Gas) | At the top rear of the intake manifold, near the distributor | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
Ignition Switch | On the lower RH side of the steering column below the support bracket | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Instrument Cluster | Body builder installed | -- | |
IP Fuse Block | Located by the body builder | Electrical Center Identification Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (Gas) | Mounted to the top of the radiator support | Engine Controls Component Views in Engine Controls | VCM Connector End Views in Engine Controls |
Vehicle Speed Sensor Calibrator (Diesel) | Above the accelerator at the RH side of the brake pedal support | Engine Controls Component Views in Engine Controls | Engine Controls Connector End Views in Engine Controls |
C101 | Engine harness to the diesel harness, at the LH rear of the engine above the intake manifold | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C200 | Engine harness to the IP harness, at the top front of the steering column support near the park brake pull button switch | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C209 | Door ajar switch provision for the body builder | -- | -- |
C300 | Engine harness to the rear chassis harness, near the middle of the chassis at the outside of the LH frame rail | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C401 | Rear chassis harness to the fuel pump module harness, along the LH frame rail next to the fuel tank | -- | Inline Harness Connector End Views in Wiring Systems |
G108 | On top of the thermostat housing | Power and Grounding Component Views in Wiring Systems | -- |
G200 | Mounted to the top front of the steering column support plate | Power and Grounding Component Views in Wiring Systems | -- |
G400 | At the LH frame rail in front of the fuel tank | -- | -- |
P100 | Main wiring pass through at the bulkhead | Harness Routing Views in Wiring Systems | -- |
R202 | In the IP side of the engine harness, 35 cm (14 in) from P100, toward the breakout for the turn signal switch connector | -- | -- |
S101 (Diesel) | In the engine harness, 16 cm (7 in) from the breakout for the auxiliary engine coolant fan motor, toward P100 | -- | -- |
S101 (Gas) | In the engine harness, 20 cm (8 in) from the breakout for C100 and C207, toward the auxiliary engine coolant fan motor | -- | -- |
S150 (Diesel) | In the engine harness, 14 cm (6 in) from P100, toward C100 and C207 | -- | -- |
S150 (Gas) | In the engine harness, 4 cm (2 in) from the breakout for the battery junction block toward C100 and C207 | -- | -- |
S165 | In the ABS harness, 10 cm (4 in) from the breakout for C110 | -- | -- |
S166 (Diesel) | In the engine harness, 2 cm (1 in) from the breakout for C100 and C207, toward the auxiliary engine coolant fan motor | -- | -- |
S166 (Gas) | In the engine harness, 5 cm (2 in) from the breakout for the cruise control module, toward the VCM | -- | -- |
S204 | In the IP harness, 26 cm (10 in) from the horn relay breakout, toward P100 | -- | -- |
S206 | In the IP harness, 25 cm (10 in) from the instrument cluster connector | -- | -- |
S210 | In the IP harness, 4 cm (1 in) from the dimmer switch and the IP cluster connector breakout, toward C200 and the horn relay | -- | -- |
S211 | In the IP harness, 6 cm (2 in) from the dimmer switch and the IP cluster connector breakout, toward the IP fuse block | -- | -- |
S214 | In the IP harness, 18 cm (7 in) from the breakout for the IP lamps dimmer switch and the instrument cluster connector, toward the IP fuse block | -- | -- |
S252/S253 (Resistor Splice) | Resistor splice for R202 in the IP side of the engine harness, 35 cm (14 in) from P100, toward the breakout for the turn signal switch connector | -- | -- |
S400 (Diesel) | In the rear chassis harness, 10 cm (4 in) from the breakout for G400 toward the fuel level sensor | -- | -- |
S400 (Gas) | In the rear chassis harness, 10 cm (4 in) from the breakout for G400 toward the fuel pump module | -- | -- |
