1. Disconnect the crankcase vent tube from the rear intermediate duct.



2. Remove the air cleaner duct bracket bolt and bracket.



3. Loosen the rear intermediate duct to adapter hose clamp and remove the duct.



4. Remove air cleaner duct adapter to throttle body stud nut and duct.



5. Disconnect the IAT sensor harness connector.



6. Loosen the front intermediate duct to air cleaner duct clamp and remove the air cleaner duct.
7. Loosen the front intermediate duct to Mass Air Flow (MAF) sensor clamp and remove the duct.



8. Loosen the air cleaner to MAF sensor clamp and remove the MAF sensor.



9. Loosen the air cleaner duct to air cleaner clamp and remove the duct.

Important: Check the air cleaner duct components for proper alignment when installing the air cleaner duct components. Leave all of the clamps loose until all of the components are properly aligned, then tighten the clamps.

1. Install the air cleaner outlet duct and the clamp to the air cleaner assembly.



2. Install the MAF sensor.



3. Install the front intermediate duct and the clamp to the air cleaner duct and the MAF sensor.



4. Connect the IAT sensor harness connector.



5. Install the air cleaner duct adapter to throttle body stud nut and duct.



6. Install the rear intermediate duct.



7. Install the air cleaner duct bracket bolt and bracket.



8. Connect the crankcase vent tube to the rear intermediate duct.