GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 GMC K Sierra - 4WD 🢒 Driveline/Axle 🢒 Transfer Case - NVG 263-NP1 (Selectable) 🢒 Instrument Cluster Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .

    2. Object Number: 348794 Size: SH
  2. Remove the screws that retain the I/P cluster to the I/P assembly.

    3. Object Number: 348734 Size: SH
  3. Remove the I/P cluster from the vehicle by tilting the bottom of the cluster outward.
  4. Disconnect the I/P cluster harness from the I/P cluster.

Installation Procedure

    Object Number: 348734 Size: SH
  1. Connect the I/P cluster harness to the I/P cluster.

    2. Object Number: 348794 Size: SH
  2. Install the I/P cluster onto the I/P with the screws. Tilt the top of the cluster into the retainer first to avoid damaging the flexible circuit connections.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the screws that retain the I/P cluster to the I/P assembly.

    4. Tighten
    Tighten the screws to 1.6 N·m (14 lb in).

  4. Install the I/P cluster trim plate bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .