GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2000 🢒 GMC C Sierra - 2WD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Door Striker Replacement - Body Mounted Rear

Removal Procedure

    Object Number: 570308 Size: SH
  1. Remove the upper garnish trim panel. Refer to Rear Door Opening Frame Garnish Molding Replacement .
  2. Remove the striker screws.
  3. Remove the striker.

Installation Procedure

    Object Number: 570308 Size: SH
  1. Install the striker to the vehicle.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the striker screws.

    3. Tighten
    Tighten the screws to 25 N·m (18 lb ft).

  3. Install the upper garnish trim panel. Refer to Rear Door Opening Frame Garnish Molding Replacement .