GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 GMC C Sierra - 2WD 🢒 Body and Accessories 🢒 Body Rear End 🢒 Endgate Linkage Replacement

Removal Procedure

    Object Number: 366584 Size: SH
  1. Lower the endgate.
  2. Loosen the endgate handle bolts. Refer to Endgate Handle Replacement .
  3. Raise the endgate.

    4. Object Number: 366585 Size: SH
  4. Remove the handle bezel by prying gently on the upper snap-in tabs.
  5. Lower and support the endgate.
  6. Remove the endgate latch assembly. Refer to Endgate Latch Replacement .

    7. Object Number: 352941 Size: SH
  7. Disengage the linkage rod from the latch assembly.

    8. Object Number: 347054 Size: SH
  8. Remove the linkage rod from the endgate handle assembly.

Installation Procedure
  1. Install the linkage rod to the endgate handle assembly.

    2. Object Number: 352941 Size: SH
  2. Engage the linkage rod to the latch assembly.
  3. Install the endgate latch assembly. Refer to Endgate Latch Replacement .
  4. Raise the endgate.

    5. Object Number: 347054 Size: SH
  5. Install the endgate handle bezel.

    6. Object Number: 366584 Size: SH
  6. Tighten the endgate handle bolts. Refer to Endgate Handle Replacement .