DEFINITION: This diagnostic table should only be used if the LH mirror moves up and down but will not move left to right.

1. Disconnect the right power outside mirror connector.
2. Position the selector switch to the RH power mirror.
3. Connect a test lamp between CKT 881 (RED/WHT) cavity E and ground.
4. Press the switch to the right position.

Does the test lamp light?

--

Go to Step 2

Go to Step 3

Replace the horizontal power mirror motor. Refer to Outside Rearview Mirror Replacement in Doors.

Is the repair complete?

--

System OK

--

1. Locate and repair open in CKT 881 (RED/WHT) between the RH outside power mirror and the power mirror switch.
2. If there is no open, replace the power mirror switch. Refer to Power Accessory Switch Panel Replacement .

Is the repair complete?

--

System OK

--