| Table 1: | Module Information |
| Table 2: | Data |
Ignition Switch in the RUN position/Vehicle in PARK/Headlamps in AUTO Position | ||
|---|---|---|
Scan Tool Parameter | Units Displayed | Typical Data Value |
Manufacturers Enable Counter | 0-255 | 0 |
Module Part Number | NUMERIC | 16XXXXXX (Varies with Vehicle) |
Security Calibration Number | NUMERIC | 16XXXXXX (Varies with Vehicle) |
Security Suffix | Two Letters | AA-ZZ (Varies with Vehicle) |
Ignition Switch in the RUN position/Vehicle in PARK/Headlamps in AUTO position | ||
|---|---|---|
Scan Tool Parameter | Units Displayed | Typical Data Value |
Auto Learn Timer | SECONDS | 0-600 Seconds |
Battery Voltage | Volts | 9.0-16.0 Volts (Varies) |
Ignition 1 | ACTIVE/INACTIVE | ACTIVE |
Ignition 3 | ACTIVE/INACTIVE | ACTIVE |
Passlock™ Code | Open/Short/Tamper/Numeric | Valid Code XX |
Passlock™ Data Voltage | Volts | 0.86-4.28 Volts - Typical |
Passlock™ Power | ACTIVE/INACTIVE | ACTIVE |
Passlock™ State | Ignition OFF/Tamper/Fail Enable/Fail Enable Dec/Seedkey Lrn Pend/Seedkey Learn/Auto Learn Pend/Learn Passlock™/Monitor Passlock™/Normal Decision/Auto Learn | Monitor Passlock™ |
Security Lamp State | ON/OFF/FLASHING | OFF |
Tamper Timer | SECONDS | 0-600 Seconds |
VCM/PCM Fail Enable | YES/NO | NO |
VCM/PCM Fuel Continue | YES/NO | YES |
VCM/PCM Learn Timer | ACTIVE/INACTIVE | INACTIVE |
VTD Fuel Disable | ACTIVE/INACTIVE | INACTIVE |
VTD Fuel Disable Until Ign OFF | YES/NO | NO |
VTD Password Learn Mode | ACTIVE/INACTIVE | INACTIVE |
