Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | ||
2 | Do the wipers operate properly? | -- | Diagnose and repair the wiper system. Go to Wiper/Washer System Check . | |
3 | Remove and inspect the W/W PMP fuse. Is the fuse open? | -- | ||
4 | Check for a short to ground in CKT 228 and the underhood bussed electrical center (UBEC). Is a short to ground present? | -- | ||
5 | Repair the short to ground in CKT 228 and the UBEC. Is the repair complete? | -- | -- | |
6 | Replace the W/W PMP fuse. Is the replacement complete? | -- | -- | |
7 |
Is the test light on? | -- | ||
8 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Is the replacement complete? | -- | -- | |
9 |
Is the test light ON? | -- | ||
10 | Repair the open in CKT 94 between the switch and the UBEC. Is the repair complete? | -- | -- | |
11 |
Is the test light on? | -- | ||
12 | Repair the open in CKT 228 between the UBEC and the pump. Is the repair complete? | -- | -- | |
13 | Connect a test light from the washer pump connector (harness side), terminal A to terminal B. Is the test light on? | -- | ||
14 | Replace the windshield washer pump. Refer to Washer Pump Replacement . Is the replacement complete? | -- | -- | |
15 | Repair the open in CKT 150. Is the repair complete? | -- | -- |
