1. Turn OFF the ignition.
2. Remove the right rear turn signal lamp.
3. Inspect the filament.

Is the filament open?

--

Go to Step 2

Go to Step 3

Replace the open bulb. Refer to Tail/Turn Signal Lamp Replacement .

Is the repair complete?

--

System OK

--

Connect a self powered test lamp from terminal G to ground.

Does the test lamp light?

--

Go to Step 5

Go to Step 4

Locate and repair the open in CKT 1750 (BLK) between the lamp and the rear lamps bussing block.

Is the repair complete?

--

System OK

--

Locate and repair the open in CKT 2115 (DK BLU) between the lamp and the underhood bussed electrical center (UBEC).

Is the repair complete?

--

System OK

--