Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Is the problem the left side turn signals? | -- | ||
2 | Remove and inspect the lt TURN fuse. Is the fuse open? | -- | ||
3 | Locate and repair CKT 2114 (LT BLU) for a short to ground. Is the repair complete? | -- | System OK | -- |
4 |
Does the scan tool show ON? | -- | ||
5 | Locate and repair the open in CKT 2114 (LT BLU) between the mid bussed electrical center (MBEC) and the LT TURN fuse. Is the repair complete? | -- | System OK | -- |
6 | Connect a test lamp (back probe) from terminal A7 of C201A to ground. Does the test light/flash? | -- | ||
7 | Replace the turn/hazard switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Is the repair complete? | -- | System OK | -- |
8 | Locate and repair the open in CKT 14 (LT BLU) between the switch and the MBEC. Is the repair complete? | -- | System OK | -- |
9 | Remove and inspect the RT TURN fuse. Is the fuse open? | -- | ||
10 | Locate and repair CKT 2115 (DK BLU) for a short to ground. Is the repair complete? | -- | System OK | -- |
11 |
Does the scan tool show ON? | -- | ||
12 | Locate and repair the open in CKT 15 (RT BLU) between MBEC and the RT TURN fuse. Is the repair complete? | -- | System OK | -- |
13 | Connect a test lamp (back probe) from terminal A6 of C201A to ground. Does the test light/flash? | -- | ||
14 | Replace the turn/hazard switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Is the repair complete? | -- | System OK | -- |
15 | Locate and repair the open in CKT 15 (RT BLU) between switch and MBEC. Is the repair complete? | -- | System OK | -- |
