GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1999 🢒 GMC C Sierra - 2WD 🢒 Engine 🢒 Engine Controls - 4.3L 🢒 Accelerator Control Cable Replacement

Removal Procedure

    Object Number: 489179 Size: SH
  1. Remove the air inlet tube and resonator retaining wingnut.

    2. Object Number: 489176 Size: SH
  2. Remove the air inlet tube and resonator from the throttle body by pivoting the air inlet tube and resonator upward until the hinge clip releases from the lip on the throttle body.

    3. Object Number: 26764 Size: SH
  3. Remove the accelerator cable from the cable routing bracket.

    4. Object Number: 325556 Size: SH
  4. Remove the throttle cable from the throttle lever.

    5. Object Number: 325557 Size: MH
  5. Remove the accelerator cable from the engine cable bracket.

    6. Object Number: 26784 Size: SH
  6. Remove the accelerator cable from the accelerator pedal (2).

    7. Object Number: 26786 Size: SH
  7. Remove the accelerator cable from the dash panel (1).

Installation Procedure

    Object Number: 26786 Size: SH
  1. Install the accelerator cable to the dash panel (1).

    2. Object Number: 26784 Size: SH
  2. Install the accelerator cable to the accelerator pedal (2).

    3. Object Number: 325557 Size: MH
  3. Install the accelerator cable to the engine cable bracket.

    4. Object Number: 325556 Size: SH
  4. Install the throttle cable to the throttle lever.

    5. Object Number: 26764 Size: SH
  5. Install the accelerator cable to the cable routing bracket.

    6. Object Number: 489176 Size: SH
  6. Align the hinge clip with the lip on the throttle body.

    7. Install the air inlet tube and resonator to the throttle body by pivoting the air inlet tube and resonator downward until the mounting stud is through the hole in the air inlet tube.


    Object Number: 489179 Size: SH
  7. Install the resonator retaining wingnut.