GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 1997 🢒 GMC C Pickup - 2WD 🢒 Bulletins 🢒 CAMPAIGN: CLUTCH PEDAL SEP. FROM PIVOT BRACKET

CAMPAIGN: CLUTCH PEDAL SEP. FROM PIVOT BRACKET

CUSTOMER SATISFACTION CAMPAIGN

SUBJECT: 97006 - CLUTCH PEDAL SEPARATION FROM PIVOT BRACKET --------------------------------------------------

MODELS: 1997 CHEVROLET AND GMC C/K PICKUPS EQUIPPED WITH MANUAL ------------------------------------------------------- TRANSMISSIONS (MG5/MW3/M50) AND BUILT AT FORT WAYNE ASSEMBLY PLANT ------------------------------------------------------------------

THIS CAMPAIGN BULLETIN WAS SENT TO DEALERS VIA DCS ON FEBRUARY 4, 1997.

General Motors has decided that certain 1997 C/K Pickup Trucks produced at the Fort Wayne Assembly Plant and equipped with manual transmissions (MG5/MW3/M50), may exhibit a condition in which the clutch pedal could separate from its pivot bracket. When this occurs, the driver is no longer able to disengage the clutch.

VEHICLES INVOLVED

Involved are certain 1997 C/K Pickups equipped with a manual transmission (MG5/MW3/M50) built at Fort Wayne Assembly Plant. The involved VINs are listed below:

SHIP TO VIN DLR. CODE ----------------- --------- 1GCEC14W2VZ178254 13-02-085 1GCEK14R2VZ177246 13-02-285 1GCEC14W9VZ178381 13-02-440 1GCHK34JXVZ177093 13-03-147 1GCGK24R6VZ178026 13-03-204 1GCGC24R5VZ178841 13-03-509 1GCEK14RXVZ178130 13-03-669 1GCEC14W7VZ177102 13-04-310 1GCEC14W9VZ178655 13-04-310 1GCHK34F6VZ177197 13-04-606 1GCEK14MOVZ178092 13-04-753 1GCEC14W3VZ177906 13-04-945 1GCEK14W2VZ177334 13-05-008 1GCEC14W9VZ177361 13-05-011 1GCEC14M8VZ177284 13-05-046 1GCEC14WOVZ178284 13-05-046 1GCEK14W6VZ177191 13-05-061 1GCGC34R1VZ177529 13-05-078 1GCEC14W3VZ177081 13-05-137 1GCEC14W3VZ177372 13-05-145 1GCEC14W6VZ178127 13-05-382 1GCEC14W8VZ177092 13-06-118 1GCEC14W8VZ177108 13-06-230 1GCEC14WXVZ177451 13-06-230 1GCEK14W6VZ177417 13-06-523 1GCEC14W3VZ177226 13-07-147 1GCEC14W5VZ177454 13-07-147 1GCEC14WOVZ177510 13-07-147 1GCEC14W4VZ178501 13-07-147 1GCEC14W9VZ178641 13-07-147 1GCEC14W5VZ177583 13-07-218 1GCEK14R6VZ177380 13-07-287 1GCGC24R9VZ178079 13-07-566 1GCEK14W5VZ178378 13-08-230 1GCEC14W3VZ177310 13-08-568 1GCEK14M3VZ178149 13-10-869 1GCEC14WOVZ177488 13-15-064 1GCEC14M9VZ177231 13-15-247 1GCEK14W4VZ177612 13-16-026 1GCEK14R1VZ178047 13-16-106 1GCEC14W5VZ178104 13-16-153 1GCFC24R9VZ177624 13-17-105 1GCEK14R2VZ178123 13-17-418 1GCEK14W8VZ177421 13-17-442 1GCEK14WOVZ178479 13-17-672 1GCEK14W9VZ177220 13-18-054 1GCGC24F1VZ177479 13-18-128 1GCEK14R8VZ177199 13-18-293 1GCEK14WlVZ177552 13-19-073 1GCEK14R9VZ177146 13-19-113 1GCGC24R9VZ178860 13-19-446 1GCEC14W5VZ178118 13-20-084 1GCEC14W5VZ178068 13-20-560 1GCEK14R2VZ177635 13-24-041 1GCEC14WXVZ177224 13-24-570 1GCEC14W9VZ178185 13-24-872 1GCEK14W5VZ177196 13-30-016 1GCEK14W3VZ177259 13-30-016 1GCEK14WXVZ178098 13-30-016 1GCEC14WXVZ177501 13-30-141 1GCEK14M3VZ177065 13-30-406 1GCGC24R7VZ177559 13-30-465 1GCEC14WOVZ177393 13-32-087 1GCEC14W7VZ177150 13-32-187 1GCEK14W1VZ178863 13-32-446 1GCEC14W6VZ178046 13-32-453 1GCEC14W7VZ178427 13-32-498 1GCGC24R3VZI78143 13-39-203 1GCEC14W5VZ177258 13-44-361 1GCEC14W5VZ177969 13-44-451 1GCEC14W1VZ177404 13-59-358 1GCEK14RXVZ177415 13-59-358 1GCEC14WOVZ178060 13-59-358

GMC VEHICLES:

SHIP TO VIN DLR. CODE ----------------- --------- 1GTGK24R4VZ524882 48-06-203 1GTEC14WOVZ525113 48-06-304 1GTEK14M8VZ525183 48-06-530 1GTEK14M5VZ525223 48-06-569 1GTEC14WXVZ524941 48-10-064 1GTEC14MXVZ525456 48-10-263 1GTEC14W8VZ525022 48-21-734 1GTGC34RXVZ525117 48-26-454 1GTEK14W5VZ525174 48-30-851 1GTEC14W6VZ524922 48-40-156 1GTEC14W8VZ524856 48-42-329 1GTGK24R7VZ524875 48-44-034 1GTGC24RXVZ525371 48-44-187 1GTEC14WXVZ524857 48-47-530 1GTFC24R1VZ525206 48-47-572 1GTEC14M9VZ524895 48-50-055 1GTEC14W7VZ524847 48-50-113 1GTEC14MXVZ525246 48-50-113 1GTEC14W9VZ525272 48-50-144 1GTEC14W3VZ525025 48-50-213 1GTEC14WOVZ525306 48-50-246 1GTEC14WOVZ524902 48-51-021 1GTEC14R9VZ524861 48-51-182 1GTEC14R4VZ525139 48-53-184 1GTEC14W5VZ525009 48-53-202 1GTEC14R9VZ525010 48-53-208 1GTEK14R9VZ525186 48-53-302 1GTEC14M4VZ524898 48-53-429

NOTICE: Dealers should confirm vehicle eligibility through VISS (Vehicle Information Service System) or ServiceNet (GMC only) prior to beginning campaign repairs. [Not all vehicles within the above breakpoints may be involved]

PARTS INFORMATION

Parts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). Please refer to the campaign bulletin prior to ordering requirements. Normal orders should be placed on a DRO = Daily Replenishment Order. An emergency requirement should be ordered on a CSO = Customer Special Order.

Part Quantity/ Number Description Vehicle -------- ---------------------------------------- --------- 15705367 Bushing, Clutch Pedal Anti-Rattle 2 93221087 Bushing, Clutch Master Cylinder Push Rod 1

CUSTOMER NOTIFICATION

There will be no owner letter mailed. These vehicles are in-transit to dealerships and have not likely been delivered to customers.

DEALER CAMPAIGN RESPONSIBILITY

All unsold new vehicles in dealers' possession and subject to this campaign must be held and inspected/repaired per the service procedure of this campaign bulletin before customers take possession of these vehicles.

Dealers are to service all vehicles subject to this campaign at no charge to customers, regardless of mileage, age of vehicle, or ownership, from this time forward.

In summary, whenever a vehicle subject to this campaign enters your vehicle inventory, or is in your dealership for service in the future, please take the steps necessary to be sure the campaign correction has been made before selling or releasing the vehicle.

SERVICE PROCEDURE

INSPECTION PROCEDURE

Refer to the 1997 C/K Truck Service, Manual , Section 7C - Clutch, Page 5, Figure 2 for the following instructions.

1. Inspect the clutch pedal pivot bushings where they pivot in the support bracket.

The bushings must be flush or extend past the outside of the support bracket.

- If the bushings are flush or extend past the outside of the support bracket, no further action is needed. Install the GM Campaign Identification Label.

- If the bushings are not flush or not extended past the outside of the support bracket, proceed to the Repair Procedure listed below.

REPAIR PROCEDURE

1. Remove the clutch pedal following the instructions in the 1997 C/K Truck Service Manual, Section 7C - Clutch, Page 4.

2. Bend the left side of the support bracket inward until the dimension between the insides measures 3.681" - 3.720" (93.5 mm-94.5 mm).

3. Reinstall the clutch pedal following the instructions in the 1997 C/K Truck Service Manual, Section 7C - Clutch, Page 4. To ease assembly, the left pivot bushing should be installed first. Two new clutch pedal anti-rattle bushings (P/N 15705367) and a new clutch master cylinder push rod bushing (P/N 93221087) must be used when reinstalling the pedal.

4. Inspect the clutch pedal pivot bushings to be sure that they are flush or extend past the outside of the support bracket.

5. Install the GM Campaign Identification Label.

CAMPAIGN IDENTIFICATION LABEL

Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label". Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or a ball point pen.

Each "Campaign Identification Label is to be located on the radiator core support in an area which will be visible when the vehicle is brought in by the customer for periodic servicing. When installing the Campaign Identification Label, be sure to pull the tab to allow adhesion of the clear protective covering. Additional Campaign Identification Labels can be obtained from VISPAC Incorporated by calling 1-800-269-5100 (Monday-Friday, 8:00 a.m. to 4:30 p.m. EST). Ask for Item Number S-1015 when ordering.

Apply the "Campaign Identification Label" only on a clean, dry surface.

CLAIM INFORMATION

Submit a Product Campaign Claim with the information indicated below:

* REPAIR PERFORMED PART FAILED PARTS LABOR LABOR COUNT PART NO. ALLOW CC-FC 0P HOURS ----------------- ----- -------- ----- ----- ----- ----- Inspect Only - No -- -- -- MA-96 V0010 0.2 Further Action Required

Inspect and Repair 3 -- ** MA-96 V0011 0.4 Clutch Pedal

* For Campaign Administrative Allowance, add 0.1 hours to the "Labor Hours".

** The "Parts Allowance" should be the sum total of the current GMSPO Dealer Net price plus 40% for parts needed to complete the repair.

Refer to the General Motors Corporation Claims Processing Manual for details on Product Campaign Claim Submission.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.