GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Envoy - 4WD 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

    2. Object Number: 731629 Size: SH
  2. Remove the stabilizer shaft insulator clamp mounting nut.
  3. Remove the stabilizer shaft insulator clamp.
  4. Remove the stabilizer shaft insulator from the stabilizer shaft.

Installation Procedure

    Object Number: 731629 Size: SH
  1. Install the stabilizer shaft insulator to the stabilizer shaft.
  2. Install the stabilizer shaft insulator clamp.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the stabilizer shaft insulator clamp mounting nut and tighten to 75 N·m (55 lb ft).
  4. Lower the vehicle.