Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Interior Lights Dimming Schematics Connector End View Reference: Lighting Systems Connector End Views , Computer/Integrating Systems Connector End Views in Computer/Integrating Systems, or Power Door Systems Connector End Views in Doors | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
2 | Verify that the memory/heated switch backlighting is inoperative. Does the memory/heated switch backlighting operate normally? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Are any other dimmable interior backlighting lamps inoperative? | Go to Step 4 | |
4 |
Did you find and correct a condition? | Go to Step 10 | Go to Step 5 |
5 | Use a test lamp connected to B+ to backprobe the memory/heated seat switch illumination control circuit terminal at the driver door module (DDM) connector. Does the test lamp illuminate? | Go to Step 7 | Go to Step 6 |
6 | Inspect for poor connections at the harness connector of the DDM. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 8 |
7 | Inspect for poor connections at the harness connector of the memory/heated seat switch. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 9 |
8 | Replace the DDM. Refer to Control Module References in Computer/Integrating Systems for replacement, setup, and programming. Did you complete the replacement? | Go to Step 10 | -- |
9 | Replace the memory/heated seat switch. Refer to Driver Seat Adjuster Memory Switch Replacement in Seats. Did you complete the replacement? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
