Tools Required

J 45059 Angle Meter

1. Remove the generator bracket. Refer to Generator Bracket Replacement .
2. Remove the coolant air bleed pipe. Refer to Coolant Air Bleed Pipe Assembly Replacement .
3. Remove the left exhaust manifold. Refer to Exhaust Manifold Replacement - Left Side .
4. Remove the pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .
5. If equipped, remove the auxiliary air conditioning (A/C) bracket bolt (5).
6. Remove the cylinder head. Refer to Cylinder Head Removal - Left Side .
7. Clean and inspect the cylinder head. Refer to Fastener Notice Cylinder Head Cleaning and Inspection .

1. Install the cylinder head. Refer to Cylinder Head Installation - Left Side .

Notice: Refer to Fastener Notice in the Preface section.




2. If equipped, install the auxiliary A/C bracket bolt (5).

Tighten
Tighten the bolt to 20 N·m (15 lb ft).

3. Install the pushrods. Refer to Valve Rocker Arm and Push Rod Replacement .
4. Install the left exhaust manifold. Refer to Exhaust Manifold Replacement - Left Side .
5. Install the coolant air bleed pipe. Refer to Coolant Air Bleed Pipe Assembly Replacement .
6. Install the generator bracket. Refer to Generator Bracket Replacement .