GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2003 🢒 Envoy - 4WD 🢒 Body and Accessories 🢒 Doors 🢒 Door Striker Replacement

Removal Procedure

    Object Number: 723024 Size: SH
  1. Open the door.
  2. Mark the position of the striker on the door frame.
  3. Remove the 2 bolts that retain the striker to the door frame.
  4. Remove the striker and spacer from the door frame.

Installation Procedure

    Object Number: 723024 Size: SH
  1. Install the striker and spacer to the door frame.

    2. Important: Do not tighten the bolts at this time.

  2. Install the bolts that retain the striker to the door frame.
  3. Position the striker and spacer to the door frame as previously marked.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Fully tighten the bolts that retain the striker to the door frame.

    5. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  5. Close the door.