Removal Procedure
- Remove the steering wheel. Refer to Steering Wheel Replacement .
- Remove the screws that retain the lower steering column trim cover to the steering column.
- Remove the lower steering column trim cover.
- Tilt the trim cover down and slide it back in order to disengage the locking tabs.
- Remove the screws that retain the upper steering column trim cover to the steering column.
- Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
- Remove the upper steering column trim cover.
Installation Procedure
- Install the upper steering column trim cover.
- Install the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
- Install the screws that retain the upper steering column trim cover to the steering column.
- Install the lower steering column trim cover.
- Install the screws that retain the lower steering column trim cover to the steering column.
- Install the steering wheel. Refer to Steering Wheel Replacement .
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the upper steering column trim cover retaining screws to 1.4 N·m
(12 lb in).
Tighten
Tighten the lower steering column trim cover retaining screws to 6 N·m
(53 lb in).
