GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2004 🢒 Envoy - 2WD 🢒 Engine 🢒 Engine Controls - 4.8L, 5.3L, and 6.0L 🢒 Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure

    Object Number: 871952 Size: SH
  1. Push the evaporative emission (EVAP) pipe quick connect fitting retainer inward.

    2. Object Number: 898353 Size: SH
  2. Disconnect the EVAP pipe from the EVAP purge solenoid.

    3. Object Number: 898326 Size: SH
  3. Disconnect the EVAP purge solenoid electrical connector (1).

    4. Object Number: 389993 Size: SH
  4. Remove the EVAP purge solenoid bolt (2).
  5. Remove the EVAP purge solenoid (3) and insulator (1).

Installation Procedure

    Object Number: 389993 Size: SH
  1. Install the insulator (1) on the EVAP canister purge solenoid (3).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the EVAP canister purge solenoid (3).
  3. Install the EVAP canister purge solenoid bolt (2).

    4. Tighten
    Tighten the bolt to 10.5 N·m (93 lb in).


    Object Number: 898326 Size: SH
  4. Connect the EVAP purge solenoid electrical connector (1).

    5. Object Number: 898353 Size: SH
  5. Connect the EVAP pipe to the EVAP purge solenoid.