GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Envoy XUV 🢒 Accessories 🢒 Garage Door Opener 🢒 Radio Volume Compensator Interior Noise Microphone Replacement

Removal Procedure
  1. Remove the overhead console. Refer to Roof Console Replacement in Interior Trim.

    2. Object Number: 741632 Size: SH
  2. Disconnect the microphone electrical connector (3).
  3. Remove the 2 retaining screws to the microphone.
  4. Remove the microphone (2) from the overhead console.

Installation Procedure

    Object Number: 741632 Size: SH
  1. Install the microphone (2) to the overhead console.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the 2 microphone retaining screws.

    3. Tighten
    Tighten the screws to 0.8 N·m (7 lb in).

  3. Connect the microphone electrical connector (3).
  4. Install the overhead console. Refer to Roof Console Replacement in Interior Trim.