Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
-
The presence of DTCs
-
The symptom list in Symptoms will determine the correct diagnostic procedure to use.
Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Suspension Controls Schematics | |||
Turn ON the ignition, with the engine OFF. Does the LED in the inflator switch flash? | Go to Step 4 | Go to Step 2 | |
2 | Press and release the inflator ON/OFF switch. Does the LED in the Switch illuminate and the compressor start to run? | Go to Step 3 | Go to Inflator Inoperative |
3 | Press and release the inflator ON/OFF switch. Does the LED in the switch flash? | Go to Step 4 | System OK |
4 | Does the LED in the switch flash DTC 1? | Go to DTC 001 | Go to Step 5 |
5 | Does the LED in the switch flash DTC 2? | Go to DTC 002 | Go to Step 6 |
Does the LED in the switch flash DTC 3? | Go to DTC 003 | ||
