GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Canyon Pickup - 4WD 🢒 Transmission/Transaxle 🢒 Transfer Case - Isuzu T150 🢒 Transfer Case Neutral Switch Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 1313610 Size: SH
  2. Disconnect the brown engine wiring harness electrical connector (1) from the brown NEUTRAL switch electrical connector (6).

    3. Object Number: 1313612 Size: SH
  3. Disconnect the brown NEUTRAL switch electrical connector (2) from the bracket (3).
  4. Remove the transfer case NEUTRAL switch (1) and gasket (4) from the transfer case.

Installation Procedure

    Notice: Refer to Component Fastener Tightening Notice in the Preface section.


    Object Number: 1313612 Size: SH
  1. Install the transfer case NEUTRAL switch (1) and gasket (4) into the transfer case.

    2. Tighten
    Tighten the neutral switch to 39 N·m (29 lb ft).

  2. Connect the brown NEUTRAL switch electrical connector (2) to the bracket (3).

    3. Object Number: 1313610 Size: SH
  3. Connect the brown engine wiring harness electrical connector (1) to the brown NEUTRAL switch electrical connector (6).
  4. Lower the vehicle.