Tools Required

1. Remove the transfer case assembly. Refer to Transfer Case Assembly Replacement .



2. Install the J 45759 to the transfer case, using 4 suitable bolts.



3. Mount the J 3289-20  (1) to a sturdy workbench.
4. Install the J 45759  (2), with the transfer case, into the J 3289-20  (1) and secure with the pivot pin.

Notice: Refer to Transfer Case Seal Removal Notice in the Preface section.





Important: 

•	There is no shoulder to prevent the seal from going into the transfer case.

•	Turn, and hold the J 45278  (2) under the seal for removal.

5. Using the J 23907  (1) and J 45278  (2) remove the input shaft seal from the transfer case.

Discard the seal.

1. Using the J 45934 and a hammer, install the NEW input shaft seal into the transfer case.

The J 45934 will install the seal to the proper depth.




2. Remove the J 45759  (2) from the transfer case.
3. Install the transfer case assembly. Refer to Transfer Case Assembly Replacement .