GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Canyon Pickup - 2WD 🢒 Preface 🢒 Cautions and Notices 🢒 Steering Column Trim Cover Replacement

Removal Procedure
  1. Remove the knee bolster. Refer to Knee Bolster Replacement .

    2. Object Number: 1492299 Size: SH
  2. Remove the lower steering column trim cover bolts.

    3. Object Number: 723623 Size: SH
  3. Gently unsnap the upper and lower steering column trim covers and remove them.

Installation Procedure

    Object Number: 1492300 Size: SH
  1. Place the upper steering column trim cover onto the steering column.

    2. Important: If the vehicle has a column shift, the shift lever seal must be seated in the steering column trim covers correctly.

  2. Position the shift lever seal as needed.

    3. Object Number: 723623 Size: SH
  3. Gently snap the lower and upper steering column trim covers together.

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1492299 Size: SH
  4. Install the lower steering column trim cover bolts.

    5. Tighten
    Tighten the bolts to 3 N·m (27 lb in).

  5. Install the knee bolster. Refer to Knee Bolster Replacement .