GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Canyon Pickup - 2WD 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Rear Bench Seat Replacement

Removal Procedure

    Object Number: 1276836 Size: SH
  1. Remove the 2 nuts securing the front legs of the rear bench seat to the floor studs.
  2. Remove the 2 nuts securing the rear of the rear bench seat to the floor studs.
  3. Remove the rear bench seat from the vehicle.

Installation Procedure
  1. Position the rear bench seat on the floor studs.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1276836 Size: SH
  2. Install the 2 bolts securing the rear of the bench seat to the floor studs.

    3. Tighten
    Tighten the rear bench seat mounting nuts to 52.5 N·m (39 lb ft).

  3. Install the 2 nuts securing the front legs of the rear bench seat to the floor studs.

    4. Tighten
    Tighten the rear bench seat mounting nuts to 52.5 N·m (39 lb ft).