GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Canyon Pickup - 2WD 🢒 Engine 🢒 Engine Controls and Fuel - 3.7L 🢒 Fuel Tank Filler Hose Replacement

Removal Procedure

    Object Number: 1766571 Size: SH
  1. Partially drain the fuel tank below the level of the fuel fill tube. Refer to Fuel Tank Draining .
  2. Raise and support the vehicle, high enough to access the fuel fill hose through the wheelhouse liner. Refer to Lifting and Jacking the Vehicle .
  3. Remove the left rear pickup box wheelhouse liner. Refer to Pickup Box Wheelhouse Liner Replacement .
  4. Remove the fuel fill hose ground strap bolt.
  5. Remove the ground strap from the frame.

    6. Object Number: 1766208 Size: SH
  6. Loosen the fuel fill hose clamp (2) at the fuel tank.
  7. Disconnect the evaporative emission (EVAP) line (1) quick connect fitting from the fill tube vent line. Refer to Plastic Collar Quick Connect Fitting Service .
  8. Separate the fuel fill hose from the fuel tank.

    9. Object Number: 1361727 Size: SH
  9. Remove the fuel fill hose screws.
  10. Remove the fuel fill hose from the vehicle.
  11. Cap the open end of the fuel tank in order to prevent system contamination.

Installation Procedure

    Object Number: 1361727 Size: SH
  1. Uncap the fuel tank.
  2. Position the fuel fill hose to the fender.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the fuel fill hose screws.

    4. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 1766208 Size: SH
  4. Install the fuel fill hose to the fuel tank.
  5. Connect the fuel tank EVAP line (1) quick connect fitting to the fill tube vent line. Refer to Plastic Collar Quick Connect Fitting Service .
  6. Tighten the fuel fill hose clamp (2) at the fuel tank.

    7. Tighten
    Tighten the clamp to 2.5 N·m (22 lb in).


    Object Number: 1766571 Size: SH
  7. Install the ground strap to the frame. Ensure that the anti rotation tab is inserted into the hole in the frame.
  8. Install the fuel fill hose ground strap bolt.

    9. Tighten
    Tighten the bolt to 9 N·m (80 lb in).

  9. Install the left rear pickup box wheelhouse liner. Refer to Pickup Box Wheelhouse Liner Replacement .
  10. Lower the vehicle.
  11. Refill the fuel tank.
  12. Install the fuel fill cap.