GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2007 🢒 Canyon Pickup - 2WD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Windshield Pillar Garnish Molding Replacement

Removal Procedure

    Object Number: 1276798 Size: SH
  1. Remove the bolt cover (1) using a flat-bladed plastic tool.
  2. Remove the windshield garnish molding bolt (3) securing the molding to the pillar.
  3. Remove the windshield garnish molding by pulling the molding away from the pillar.

Installation Procedure

    Object Number: 1276798 Size: SH
  1. Position the windshield garnish molding on the pillar.
  2. Install the molding by firmly pressing the molding against the pillar to seat the fasteners (2).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the windshield garnish molding bolt (3).

    4. Tighten
    Tighten the bolt to 9 N·m (79 lb in).

  4. Install the bolt cover (1).