GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Canyon Pickup - 2WD 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 942101 Size: SH
  2. Remove the nuts from the link assemblies.
  3. Remove the link assemblies.
  4. Inspect all of the parts for wear and damage.

Installation Procedure
  1. Support the lower control arms at curb height.

    2. Object Number: 942101 Size: SH
  2. Install the link assemblies.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the nuts to the link assemblies.

    4. Tighten
    Tighten the nut to 44 N·m (32 lb ft).

  4. Lower the vehicle.