GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2005 🢒 Canyon Pickup - 2WD 🢒 Body 🢒 Wiring Systems 🢒 Mass Airflow Sensor with Intake Air Temperature Sensor Replacement

Removal Procedure

    Object Number: 1352006 Size: SH
  1. Disconnect the electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
  2. Remove the 2 screws securing the MAF/IAT sensor to the air cleaner assembly.
  3. Remove the MAF/IAT sensor from the air cleaner assembly.

Installation Procedure

    Notice: 

       • Handle the MAF sensor carefully.
       • Do not drop the MAF sensor in order to prevent damage to the MAF sensor.
       • Do not damage the screen located on the air inlet end of the MAF.
       • Do not touch the sensing elements.
       • Do not allow solvents and lubricants to come in contact with the sensing elements.
       • Use a small amount of a soap based solution in order to aid in the installation.


    Object Number: 1352006 Size: SH
  1. Insert the MAF/IAT sensor into the air cleaner assembly.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the 2 screws securing the MAF/IAT sensor to the air cleaner assembly.

    3. Tighten
    Tighten the MAF/IAT sensor screws to 2.25 N·m (20 lb in).

  3. Connect the electrical connector to the MAF/IAT sensor.