Door Lock and Side Window Switch Replacement - Driver Side. GMC Truck Acadia

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2009 🢒 Acadia - AWD 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Door Lock and Side Window Switch Replacement - Driver Side

Door Lock and Side Window Switch Replacement - Driver Side Outlook only with RPO AXA

Callout	Component Name
Preliminary Procedure Remove driver side door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side .
1	Front Side Door Lock and Side Window Switch Assembly Procedure Disconnect the electrical connector from the switch assembly. Depress the retainers from the back side of the door panel. Lift upward at the rear edge of the switch assembly then slide up and out of the door panel.

Callout

Component Name

Preliminary Procedure

Remove driver side door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side .

Front Side Door Lock and Side Window Switch Assembly

Procedure

Disconnect the electrical connector from the switch assembly.
Depress the retainers from the back side of the door panel.
Lift upward at the rear edge of the switch assembly then slide up and out of the door panel.

Door Lock and Side Window Switch Replacement - Driver Side with RPO AXE or AXC

Callout	Component Name
Preliminary Procedure Remove the driver side door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side.
1	Front Side Door Lock and Side Window Switch Screw (Qty: 3) Caution: Refer to Fastener Caution in the Preface section. Tighten 3 N·m (27 lb in)
2	Front Side Door Lock and Side Window Switch Assembly Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and set-up information.

Callout

Component Name

Preliminary Procedure

Remove the driver side door trim panel. Refer to Front Side Door Trim Panel Replacement - Left Side.

Front Side Door Lock and Side Window Switch Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (27 lb in)

Front Side Door Lock and Side Window Switch Assembly

Procedure

Disconnect the electrical connectors.
Refer to Control Module References for programming and set-up information.

Door Lock and Side Window Switch Replacement - Driver Side Traverse with RPO AXE

Callout	Component Name
1	Front Side Door Lock and Side Window Switch Assembly Procedure Lift upward at the rear edge of the switch assembly then slide up and out of the door panel. Disconnect the electrical connector from the switch assembly.