Rearview Camera Replacement. GMC Truck Acadia

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2009 🢒 Acadia - AWD 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Rearview Camera Replacement

Rearview Camera Replacement Acadia, Enclave, OUTLOOK

Callout	Component Name
Preliminary Procedure Remove the liftgate applique. Refer to Liftgate Applique Replacement.
1	Double Ended Stud with Collar (Qty: 2) Tip Remove in order to remove the isolator from the applique.
2	Liftgate Applique Isolator Tip Carefully release the isolator tab from the liftgate applique.
3	Rearview Camera Procedure Disengage the electrical harness from above the rear latch clips. Disconnect the camera electrical harness connector from the rear license plate lamp harness electrical connector. Ensure the electrical harness is properly positioned prior to installation of the liftgate applique isolator.

Callout	Component Name
Preliminary Procedure Remove the liftgate outside handle. Refer to Liftgate Outside Handle Replacement.
1	Rearview Camera Screw (Qty: 4) Caution: Refer to Fastener Caution in the Preface section. Tighten 2.5 N·m (22 lb in)
2	Rearview Camera Tip Release tape to remove the wiring harness.

Callout

Component Name

Remove the liftgate outside handle. Refer to Liftgate Outside Handle Replacement.

Rearview Camera Screw (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

Rearview Camera

Tip
Release tape to remove the wiring harness.