Preliminary Procedures

1. Remove the bodyside trim panel. Refer to Quarter Lower Rear Trim Panel Replacement.
2. Disconnect the power liftgate actuator rod. Refer to Liftgate Actuator Rod Replacement.

1

Liftgate Close Actuator Control Module

Procedure

1. Disconnect the electrical connector.
2. Cut the tie strap, if equipped.

2

Liftgate Close Actuator Motor Control Module Bolt (Qty: 5)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

3

Liftgate Close Actuator Control Module

Procedure

Reprogram liftgate module. Refer to Liftgate Calibration.