Lift Plate and Holding Fixture Installation. GMC Truck Acadia

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2009 🢒 Acadia - AWD 🢒 Transmission 🢒 Automatic Transmission - 6T70/6T75 🢒 Lift Plate and Holding Fixture Installation

Callout	Component Name
1	DT-47811-A Transmission Lift Plate Warning: Handle with care, the transmission assembly weighs over 200 lbs. Bodily injury could occur if not handled properly. Tip After Installation of lift plate, raise the transmission with an overhead hoist. Tighten 12 N·m (9 lb ft) Special Tools DT-47811-A Transmission Lift Plate For equivalent regional tools, refer to Special Tools.
2	J-46625 Transmission Holding Fixture Caution: Refer to Fastener Caution in the Preface section. Tip Adjust mounting block on fixture to match bosses on case, then tighten bolts to: Tighten 13 N·m (10 lb ft) Special Tools J-46625 Transmission Holding Fixture For equivalent regional tools, refer to Special Tools.

Callout

Component Name

DT-47811-A Transmission Lift Plate

Warning: Handle with care, the transmission assembly weighs over 200 lbs. Bodily injury could occur if not handled properly.

Tip
After Installation of lift plate, raise the transmission with an overhead hoist.

Tighten
12 N·m (9 lb ft)

DT-47811-A Transmission Lift Plate

For equivalent regional tools, refer to Special Tools.

J-46625 Transmission Holding Fixture

Caution: Refer to Fastener Caution in the Preface section.

Tip
Adjust mounting block on fixture to match bosses on case, then tighten bolts to:

Tighten
13 N·m (10 lb ft)

J-46625 Transmission Holding Fixture

For equivalent regional tools, refer to Special Tools.