Preliminary Procedures

1. Remove the right engine strut mount. Refer to Engine Mount Strut Replacement - Right Side .
2. Remove the right engine mount strut bracket. Refer to Engine Mount Strut Bracket Replacement - Right Side .
3. Remove the drive belt. Refer to Drive Belt Replacement .

1

Idler Pulley Bolt

Notice: Refer to Fastener Notice in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Tensioner Bolt

Tighten
50 N·m (37 lb ft)

3

Tensioner

Tip
Remove wire harness retainer from tensioner.