Special Tools

For equivalent regional tools, refer to Special Tools.

1. Clean the thread in the crankshaft.



2. Install the flywheel (2).
3. Install the EN-652 holder  (1).

Caution: Refer to Fastener Caution in the Preface section.




4. Install the 6 NEW flywheel bolts (1, 2) and tighten the bolts in 3 passes using the EN-45059 sensor kit :

4.1.	First pass to  35 N·m (26 lb ft)

4.2.	Second pass to additional  30 degrees

4.3.	Third pass to an additional  15 degrees

5. Remove the EN-652 holder .