GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Daewoo 🢒 2009 🢒 Lacetti (Global Delta) 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Oil Pressure Diagnosis and Testing

Special Tools

    • EN 49423 Oil Pressure Gage
    • EN 49418 Adapter Oil Pressure Check

For equivalent regional tools, refer to Special Tools.

Removal Procedure

    Object Number: 1941819 Size: SH
  1. Remove the closure bolt (1).
  2. Clean the thread.

Measurement Procedure

    Object Number: 1937132 Size: SH
  1. Install the EN 49423 gage  (2).
  2. Install the EN 49418 adapter  (1).
  3. Start the engine.
  4. Check oil pressure.

    5. At idling speed, the oil pressure must be at least 130 kPa (18,85 psi) and the oil temperature must be >=80°C (170°F).

Installation Procedure
  1. Switch off the engine.
  2. Remove the EN 49418 adapter .
  3. Remove the EN 49423 gage .
  4. Install new closure bolt in the cylinder head.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Tighten the closure bolt to 15 N·m (11 lb ft).
  6. Check the engine oil level.