GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Daewoo 🢒 2009 🢒 Lacetti (Global Delta) 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Battery Current Sensor Replacement

Removal Procedure
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.

    2. Object Number: 2027762 Size: SH
  2. Remove the negative cable nut (1).
  3. Remove the negative cable (2).

    4. Object Number: 2027817 Size: SH
  4. Disconnect the wiring harness current sensor plug (4).
  5. Remove the current sensor (5) from the battery tray.

    6. Object Number: 2027819 Size: SH
  6. Remove the current sensor (2) from the battery negative cable (1).

Installation Procedure

    Object Number: 2027819 Size: SH
  1. Install the current sensor (2) at the battery negative cable (1).

    2. Object Number: 2027817 Size: SH
  2. Install the current sensor (5) at the battery tray.
  3. Connect the wiring harness current sensor plug (4).

    4. Object Number: 2027762 Size: SH
  4. Install the negative cable (2).

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the negative cable nut (1) and tighten to  9 N·m (80 lb in).
  6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.